I am thinking how to write code to support in the same time old user with backup configuration of (mgmt.o|alcaudsl.sys|kqd6p2.eni) ... ... and the way is not very easy. We don't know how firmware/bootloader will be available so at this time the only way we have is to ask user to utilize those from the windows driver.
I think it's a bit complicated to ask the user to concatenate the 2 part under windows. I can't write code to concatenate (boot.v123.bin|kqd6p1.eni|zzzlp1.eni) to (mgmt.o|alcaudsl.sys|kqd6p2.eni) because I don't know when it is necessary and don't have a simple way to test during installation. And I don't want to add at every new installation.one more time the boot code from the configuration backup where the firmware is stored. One option is to have a sort of dry-run option in modem_run wich will answer 'boot' or 'firmware' or 'both' and do nothing else. This allow to test what part of (boot|firmware) or both is inside a file and add the boot code when necessary. Second option which is I think the easiest to do is to never concatenate the files, allow loading of two files and use -a -f ( and for all but rev 4.00 use boot.v123.bin) any comment? Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
