Hi Ok I would use pppoa3 but for some reason it will not compile on OpenBSD (something about pthreads not being supported...)
I don't suppose there is a patch for pppoa2 to sort out the errors or a workaround for the fact that pppoa3 won't compile on OpenBSD is there? Steve On Fri, 7 May 2004, Ok Overbeek (mz) wrote: > > Hi Stephen! > > pppoa2 has never been updated in order to take out the errors > that you mention. pppoa3, however, is 'flawless' in that respect. > Do you have a specific reason for not using pppoa3? > > Ok > > Stephen Day wrote: > > >Please can someone provide me with a copy of some firmware that works well > >with a SpeedTouch 330 modem. I've tried 3/4 different versions and each > >of them gives me hundreds the following errors: > > > >pppoa2[26434]: Cell had wrong VPI(16)/VCI(4224) (OAM?) PTI=0x05 > >pppoa2[26434]: CRC error in an AAL5 frame > > > >and a much reduced download speed (100-200 kbps). > > > >I have read on this list that this is due to a firmware incompatibility > >with the speedtouch driver (I'm using version 1.2) but I can't find a > >firmware version that doesn't give me these errors. I'm pretty sure it's > >not a line quality problem because my friend's SpeedTouch USB modem works > >flawlessly on my line using mgmt.o and achieves up-to 940 kbps (download) > > > >The drivers are running under OpenBSD 3.1. > > > >Any help would be greatly appreciated. > > > >Steve > > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB > >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]