Hi, I've been trying to get my Silver Speedtouch USB 330 working on a machine running Debian Woody and a custom 2.4.18 kernel.
I have tried to use the user space driver according to the SpeedTouchUSB-HOWTO I use: speedtouch-1.2.tar.gz Sachu3-windows ZZZLP1.eni 935 ZZZLP2.eni 775,509 I Load modem's microcode: /usr/local/sbin/modem_run -v 1 -a /path/to/ZZZLP1.eni -f /path/to/ZZZLP2.eni the output /var/log/syslog: debian modem_run[955]: Found SpeedTouch USB modem debian modem_run[955]: Modem revision: 0400 debian modem_run[955]: Best offset 0 with probability 100% debian modem_run[955]: Best offset 927 with probability 100% debian modem_run[955]: Firmware info (CRC:0x69636579, Size:935, Checked: Yes, Alcatel/Thomson Boot block (new)) debian modem_run[955]: Best offset 0 with probability 100% debian modem_run[955]: Best offset 775501 with probability 100% debian modem_run[955]: Firmware info (CRC:0x0223733c, Size:775509, Checked: Yes, 1.0.10 - Win32 Rev 0400 SACHU3) debian kernel: usb_control/bulk_msg: timeout debian kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 debian modem_run[955]: BLOCK1 : 935 bytes uploaded : OK debian modem_run[955]: BLOCK2 : 511 bytes downloaded : OK debian modem_run[955]: BLOCK3 : 775509 bytes uploaded : OK debian modem_run[955]: BLOCK4 : 511 bytes downloaded : OK debian modem_run[955]: Modem reference : 35720370...... debian modem_run[955]: ADSL synchronization has been obtained debian modem_run[955]: ADSL line is up (256 kbit/s down | 128 kbit/s up) Then pppd call adsl and conexion is stalled output /var/log/syslog: debian pppd[973]: Using interface ppp0 debian pppd[973]: Connect: ppp0 <--> /dev/pts/5 debian pppd[973]: Script /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 32 finished (pid 1017), status = 0xff debian pppoa3[1039]: pppoa3 version 1.2 started by root (uid 0) debian pppoa3[1039]: Control thread ready debian pppoa3[1042]: host --> pppoa3 --> modem stream ready debian pppoa3[1043]: modem --> pppoa3 --> host stream ready debian pppd[973]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x959e3fad>] debian pppoa3[1039]: pppoa3 version 1.2 started by root (uid 0) debian pppoa3[1039]: Control thread ready debian pppoa3[1042]: host --> pppoa3 --> modem stream ready debian pppoa3[1043]: modem --> pppoa3 --> host stream ready debian pppd[973]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x959e3fad>] debian last message repeated 3 times debian pppd[973]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x959e3fad>] debian last message repeated 5 times debian pppd[973]: LCP: timeout sending Config-Requests debian pppd[973]: Connection terminated. debian pppoa3[1042]: Error reading from source device debian pppoa3[1039]: Woken by a sem_post event -> Exiting debian pppoa3[1039]: Read from usb Canceled debian pppoa3[1039]: Write to usb Canceled debian pppd[973]: using channel 5 debian pppoa3[1039]: Exiting The provider use pppoe. The problem is the conexion is stalled and I can't navigate Thank you in advance for your advice. Berto Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]