----- Original Message ----- From: "Daniel JC Fisher" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 10, 2004 10:51 PM Subject: [speedtouch] Re: modem_run cause lockup
> > ---------------------------------------------------- > > [speedtouch] Re: modem_run cause lockup > > > > Gilles Espinasse > > Wed, 10 Nov 2004 10:16:05 -0800 > > > > ----- Original Message ----- > > From: "Daniel JC Fisher" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, November 10, 2004 2:27 PM > > Subject: [speedtouch] modem_run cause lockup > > [ .. ] > > Rev 4.00 will not work with mgmt.o, alcaudsl.sys or kqd6p{1|2}.eni > > You need zzzl3_012 found by loading the 330 embedded firmware for Linux > > users Rel 3.01 at http://www.speedtouch.com/driver_upgrade_lx_3.0.1.2.htm > > or you can complicate you life by using the bootloader and firmware in > > separate files (zzzlp1.eni, zzzlp2.eni) from the XP driver with modem_run. > > > Gilles > > [ .. ] > > Thank you for your advice. Unfortunately, it still does not work (same > problem as before - console appears to lock up, and ugen0 still > registers as "busy" afterwoulds). This was with > > #modem_run -m -v 2 -f KQD6_3.012 > and > #modem_run -m -v 2 -f ZZZL_3.012 > . Logging on to a second virtual terminal and attempting to start PPP > still does not work. > > Is there anything else I should try? > > Thanks! > > Daniel > Does the firmware successfully load? Did the synch message display the synch speed? Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]