----- Original Message ----- From: <[EMAIL PROTECTED]> To: "speedtouch" <[EMAIL PROTECTED]> Sent: Saturday, November 27, 2004 11:29 PM Subject: [speedtouch] Re: Sarge and speedtouch usb
> > Gilles Espinasse wrote: > > If you try with a modem_run version after v1.2 beta3 (so including v1.2, > > v1.3, v1.3.1) and KQD6P2.eni, it will fail because the bootloader (in you > > case KQD6P1.eni) is missing . Bootloader was include in the code in prior > > versions. Look at the new option -a bootloader in case of .eni files. > > Great! > > I removed from its place the hotplug script, and running from terminal: > > modem_run -k -a /path_to/KQD6P1.eni -s -f /path_to/KQD6P2.eni > > the firmware was correctly loaded. > Notice the -s option; without that the process stops with the modem's right led > permanently red. > > But... > After that I run: > > pppd call adsl updetach > > and I got this output: > > using channel 1 > Using interface ppp0 > Connect: ppp0 <--> /dev/pts/1 > Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 3001), status = 0xff > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5483febc>] > LCP: timeout sending Config-Requests > Connection terminated. Try adding in your options lcp-max-configure 50 This is what I use. The delay in which my ppp authentication server send his first answer is very variable but it is very often more than the 30 s let by the default of 10 LCP attempts (10 attempts x 3s interval give 30s). Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]