Hi all, I am running FreeBSD 6.0-RELEASE and have successfully compiled the drivers, however they do not work properly. The device is detected properly (from dmesg):
ugen0: ALCATEL Speed Touch USB, rev 1.10/0.00, addr 2 There is a FreeBSD bug report on this (http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/83504). Details of the problem are as follows: modem_run seems to download the firmware OK, but never reports line sync although the lights seem to indicate sync has been obtained. dmesg shows the following during this process: All threads purged from ugen0.1 All threads purged from ugen0.5 All threads purged from ugen0.1 All threads purged from ugen0.5 All threads purged from ugen0.6 All threads purged from ugen0.7 "ppp -background adsl" then gives the following error: Working in background mode Using interface: tun0 Child failed (errdead) and an infinite loop is entered (from dmesg): Purging 2 threads from ugen0.1 I have both a rev.0 modem (green frog) and a rev.4 modem (silver) and both exhibit exactly the same problem. I have been using these drivers since they were first ported to BSD on both OpenBSD and FreeBSD and I cannot see any problems with the configuration or a way around this. I would be happy to do any testing or provide any extra information that may be helpful in resolving this as I am very keen to find a way to get this working. Unfortunately I would not know where to start looking in the code to develop a fix for this! Many thanks for any help anyone can give, Nick. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
