Hello,
I have installed the Speed Touch 330 rev 2.00 (purple) kernel driver, on
my SuSE 9.0, kernel 2.4.21.
I followed very exactly the procedure on
'www.linux-usb.org/SpeedTouch/suse/index.html', and I have no result.
Every thing was Ok during installation :
- firmware installation /KQD6_3.012/ unziped from
/SpeedTouch330_firmware_3012.zip/, and then splitted in files
/speedtch-1.bin/ and /speedtch-2.bin/
- files /speedtch-1.bin/ and /speedtch-2.bin/ copied in
'//lib/firmware/' directory : '/firmware/' directory had to be created
because it was not,
- //etc/ppp/chap-secrets/ and //etc/ppp/chap-secrets/ are updated witl
the rigth line : '/[EMAIL PROTECTED]/' * '/mypassword/';
- as it is PPP over ATM, //etc/ppp/peers/speedtch/ is aols correct,
- an finnaly, in order to connect on boot, the file //etc/init.d/dial/
is created and configured with :
chmod 744 /etc/init.d/dial &&
insserv dial &&
rm -f /etc/init.d/rc5.d/K*dial &&
chmod 600 /etc/ppp/peers/speedtch
When I reboot, I can see during the boot (before the first logon
windows) and on the modem :
- the /usb led/ is first /blinking red/,
- the message '/The SpeedTouch firmware did not load/' is diplayed, when
the /usb led/ is still /blinking red,/
- the message '/Starting hotplugging services [ieee1394 net pci usb
...]/' is displayed, and at this moment only, the 2 leds of the modem
become solid green,
- after that, nothing seems happennig with the modem :
- no firmware loaded with ADSL led orange at the and of download,
- no synchronisation with ADSL led blonking green,
- ...
The file //etc/init.d/dial/ seems to be called too early, before the
/Starting hotplugging services /start : I don't know if it can work like
that.
I don't know how to fix this problem.
Any help would be appreciated.
Thanks.
François.
PS : I pratice a mailing list for the first time : do I have to consult
the mailing list frequently or only to wait for an answer on my mail-box
? Thanks to anyone.
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]