2007/7/31, Ed Vaessen <[EMAIL PROTECTED]>:
>
>
> Hello David,
>
> Funny things happened. Since the OpenSuSE 10.2 DVD that I got from a
> magazine and with which (as said) I could not get the firmware loaded at
> boot time or at hotplug, I downloaded an openSuSE 10.2 iso from
> http://software.opensuse.org/. That downloaded version was installed on my
> laptop, I copied the firmware speedtch-1.bin and speedtch-2.bin in
> /lib/firmware and the ADSL line went up!
> When looking at the directory tree, I found that in directory
>
> /lib/modules/2.6.18.2-34-default/kernel/drivers/usb the subdirectory atm
> is present, where it was not present when I tried the magazine DVD. That
> same magazine DVD however, when installed on my desktop, succeeded in
> getting the ADSL line up.
> As far as I can guess, the magazine DVD, when installed on my laptop, gets
> confused a bit.
>
> Ed
>
>
> >
> > Hi there,
> >       Go to the following site.
> >          http://www.linux-usb.org/SpeedTouch/suse/index.html
> >       It gives you a step by step guide to get st330 working on 10.2.
> >       It works its what I use on my OpenSuSE 10.2
> >
> >      Regards,
> >              Davids C. Findlay
> >
> >
> > On 29/07/07, Ed Vaessen <[EMAIL PROTECTED]> wrote:
> >>
> >> I installed OpenSuSE 10.2 on an Athec LT51 laptop. It seems that no
> >> script
> >> is activated to load the firmware on the Speedtouch 330 modem when it
> is
> >> plugged in.
> >> What I did was simply installing OpenSuSE 10.2 and after installation
> >> copying the binaries speedtch-1.bin and speetch-2.bin in /lib/firmware.
> >> On
> >> boot or on hotplugging, the modem is recognized, but after that no
> >> further
> >> action is taken by the system. Here the output from /var/log/messages.
> >>
> >> Jul  7 14:10:34 AtemboPC kernel: usb 2-3: new full speed USB device
> >> using
> >> ohci_hcd and address 3
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: new device found,
> >> idVendor=06b9,
> >> idProduct=4061
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: new device strings: Mfr=1,
> >> Product=2, SerialNumber=3
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: Product: Speed Touch 330
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: Manufacturer: ALCATEL
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: SerialNumber: 0090D05EDE23
> >> Jul  7 14:10:35 AtemboPC kernel: usb 2-3: configuration #1 chosen from
> 1
> >> choice
> >>
> >> Normally, one might expect further messages like the following:
> >>
> >> Jul  7 14:10:35 AtemboPC firmware.sh[10651]: Cannot find  firmware file
> >> 'speedtch-1.bin.2.00'
> >> Jul  7 14:10:35 AtemboPC firmware.sh[10655]: Cannot find  firmware file
> >> 'speedtch-1.bin.2'
> >> Jul  7 14:10:35 AtemboPC kernel: speedtch 2-3:1.0: found stage 1
> >> firmware
> >> speedtch-1.bin
> >> Jul  7 14:10:35 AtemboPC firmware.sh[10663]: Cannot find  firmware file
> >> 'speedtch-2.bin.2.00'
> >> Jul  7 14:10:35 AtemboPC firmware.sh[10667]: Cannot find  firmware file
> >> 'speedtch-2.bin.2'
> >> Jul  7 14:10:36 AtemboPC kernel: speedtch 2-3:1.0: found stage 2
> >> firmware
> >> speedtch-2.bin
> >> Jul  7 14:10:40 AtemboPC kernel: ATM dev 0: ADSL line is synchronising
> >> Jul  7 14:10:51 AtemboPC kernel: ATM dev 0: DSL line goes up
> >> Jul  7 14:10:51 AtemboPC kernel: ATM dev 0: ADSL line is up (3072 kb/s
> >> down | 512 kb/s up)
> >>
> >>
> >> I had a look at the output of udevmonitor --env to see what happens
> when
> >> the modem is plugged in and I find, among a lot of output, the line:
> >>
> >> PHYSDEVDRIVER=usb
> >>
> >> Now I also have openSuSE 10.2 installed on a desktop, where the same
> >> speedtouch modem functions correctly and there the corresponding line
> >> reads:
> >> PHYSDEVDRIVER=speedtch
> >>
> >> Also, the module speedtch is not found on my laptop
> >>
> >> I am not at home with all the kernel business, so can someone please
> >> tell
> >> what is wrong on my laptop?
> >>
> >> Ed
> >>
> >>
> >> Liste de diffusion modem ALCATEL SpeedTouch USB
> >> Pour se désinscrire :
> >> mailto:[EMAIL PROTECTED]
> >>
> >>
> >>
> > Liste de diffusion modem ALCATEL SpeedTouch USB
> > Pour se désinscrire :
> > mailto:[EMAIL PROTECTED]
> >
> >
> >
>
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se désinscrire : mailto:[EMAIL PROTECTED]
> ?subject=unsubscribe
>
>
>


-- 
Marcos Montivero
(011)-15-5451-1965
Nextel 178*2459

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

        

Reply via email to