Hi! When connected to the Arduino Uno via spi, the readings of the ADS1220
sensor from the CJMCU are read correctly. When connecting the sensor to the
d5..d8 wemos d1 mini (using pinout), there is no connection with the sensor
(or the sensor fails). I am using d0 as drdy. I use power from a USB
computer for wemos. The sensor is connected by five wires d5...d8 and d0. I
ask for help to provide a fragment of the wemos d1 mini v3.0.0 spi setup
and a connection diagram.
Here's my sketch. The sensor works correctly only with arduino uno. When
working with the wemos d1 mini board, it constantly restarts, and the
sensor is not initialized. I use only five wires to connect the controller
and the sensor. I think that the problem is in the settings of the SPI
interface, since the pin numbers of Uno and Wemos do not match. Please help
me figure out how to configure the Wemos d1 mini SPI interface.
**************************************************************************
*/#include <ADS1220_WE.h>#include <SPI.h>**/* *
UNO Wemos d1 mini
#define SPI_CLK D13 14
#define SPI_MISO D12 12
#define SPI_MOSI D11 13
*/
// for Wemos d1 mini
#define ADS1220_CS_PIN D8 // 15 chip select pin
#define ADS1220_DRDY_PIN D0 // 16 data ready pin
// for UNO
//#define ADS1220_CS_PIN 7 // chip select pin
//#define ADS1220_DRDY_PIN 6 // data ready pin
/* Create your ADS1220 object
*/ADS1220_WE ads = ADS1220_WE(ADS1220_CS_PIN, ADS1220_DRDY_PIN);*
void setup(){
Serial.begin(115200);
pinMode(ADS1220_CS_PIN, OUTPUT); //On the ESP8266 in normal SPI mode we
need to decide on SS and set it to output.
digitalWrite(ADS1220_CS_PIN, HIGH); //deselect SPI device
SPI.begin();
SPI.setClockDivider(SPI_CLOCK_DIV128);
Serial.print("ADS1220_CS_PIN - "); Serial.println(ADS1220_CS_PIN);
Serial.print("ADS1220_DRDY_PIN - "); Serial.println(ADS1220_DRDY_PIN);
Serial.print("D5 - "); Serial.println(D5);
Serial.print("D6 - "); Serial.println(D6);
Serial.print("D7 - "); Serial.println(D7);
delay(1000);
if(!ads.init()){
Serial.println("ADS1220 is not connected!");
while(1);
}
}
void loop(){
float result = 0.0;
ads.setCompareChannels(ADS1220_MUX_0_1);
delay(100);
result = ads.getVoltage_mV();
delay(200);
Serial.print("AIN0 vs. AIN1 [mV]: ");
Serial.println(result);
delay(600);
}
--
You received this message because you are subscribed to the Google Groups
"sphinx-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sphinx-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sphinx-users/75c2be21-09c9-4a87-bebd-3c44814d5e4en%40googlegroups.com.
