On Tuesday 15 April 2008, hartleys wrote: > I do get the IRQ on every card insertion and removal. Actually if I boot > the system with the card removed I end up getting a: > > mmc0: error -22 whilst initialising SDIO card
That's correct, except for the obvious lie about SDIO. ;) > If I then insert the card I get the IRQ and: > > mmc0: new MMC card on SPI > mmcblk0: mmc0:0001 SDM064 62720KiB > mmcblk0: p1 p2 p3 p4 > > So it appears the initial card detect does work. But for some reason > it's not seeing the removal of the card or the insertion of a new card. > > Any ideas? No; that used to work OK. I wonder if there have been changes in the MMC framework which caused this trouble; I've seen some oddness there too, the last few times I have tried to use those card detect code paths. - Dave ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
