Dear Wolfram Sang,
> On Fri, Aug 24, 2012 at 05:44:31AM +0200, Marek Vasut wrote:
> > This patch implements DMA support into mxs-i2c. DMA transfers are now
> > enabled via DT. The DMA operation is enabled by default.
> >
> > Signed-off-by: Marek Vasut <ma...@denx.de>
>
> Unsurprisingly, I also couldn't get the mode switching between DMA and
> PIOQUEUE to work :(
I'd say more work should be invested into this. Besides, what about rather
trying PIO + DMA instead of PIOQ + DMA?
> However, I did come up with an idea how to select DMA or PIOQUEUE per
> bus via devicetree. If we change the view from "I want PIOQUEUE" to "I
> don't want DMA", we could simply override the default DMA configuration
> in the devicetree with, e.g.:
>
> i2c0: i2c@80058000 {
> ...
> fsl,i2c-dma-channel = <>;
> };
>
> So, no DMA channel set up will fall back to PIOQUEUE. This is more
> generic than a custom binding, because if one doesn't want DMA, don't
> configure it. That should also work with other devices which can fall
> back to something. I think this is worth trying, another advantage is
> that it doesn't expose something new to the user. So, there is no legacy
> support needed in case there will be a better way of configuration.
Ewww ... that's such an ad-hoc hack. Besides, someone might simply forget to
add
the binding, you'd need to print a warning.
> So, here is a proof-of-concept patch which adds that to Marek's DMA
> implementation which I'd like to fold into it. I am about to prepare a
> proper series and will post it later today. Comments appreciated.
>
> Thanks,
>
> Wolfram
>
> diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
> index 1f58197..0198a43 100644
> --- a/drivers/i2c/busses/i2c-mxs.c
> +++ b/drivers/i2c/busses/i2c-mxs.c
> @@ -35,10 +35,6 @@
>
> #define DRIVER_NAME "mxs-i2c"
>
> -static bool use_pioqueue;
> -module_param(use_pioqueue, bool, 0);
> -MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of
> DMA"); -
> #define MXS_I2C_CTRL0 (0x00)
> #define MXS_I2C_CTRL0_SET (0x04)
>
> @@ -556,24 +552,13 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev
> *i2c) int ret;
>
> /*
> - * The MXS I2C DMA mode is prefered and enabled by default.
> - * The PIO mode is still supported, but should be used only
> - * for debuging purposes etc.
> - */
> - i2c->dma_mode = !use_pioqueue;
> - if (!i2c->dma_mode)
> - dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
> -
> - /*
> * TODO: This is a temporary solution and should be changed
> * to use generic DMA binding later when the helpers get in.
> */
> ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
> &i2c->dma_channel);
> - if (ret) {
> - dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
> - i2c->dma_mode = 0;
> - }
> + if (ret)
> + i2c->dma_mode = false;
>
> ret = of_property_read_u32(node, "clock-frequency", &speed);
> if (ret)
> @@ -624,6 +609,13 @@ static int __devinit mxs_i2c_probe(struct
> platform_device *pdev) if (err)
> return err;
>
> + /*
> + * The MXS I2C DMA mode is prefered and enabled by default.
> + * Ideally, we'd switch between PIOQUEUE and DMA depending on the
> + * message size, but neither Marek Vasut nor Wolfram Sang got this
> + * to work without resetting the controller completely :(
> + */
> + i2c->dma_mode = true;
> i2c->dev = dev;
> i2c->speed = &mxs_i2c_95kHz_config;
>
> @@ -640,8 +632,8 @@ static int __devinit mxs_i2c_probe(struct
> platform_device *pdev) i2c->dma_data.chan_irq = dmairq;
> i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
> if (!i2c->dmach) {
> - dev_err(dev, "Failed to request dma\n");
> - return -ENODEV;
> + dev_err(dev, "Failed to request dma, falling back\n");
> + i2c->dma_mode = false;
> }
> }
>
> @@ -668,6 +660,8 @@ static int __devinit mxs_i2c_probe(struct
> platform_device *pdev)
>
> of_i2c_register_devices(adap);
>
> + dev_info(dev, "registered. DMA: %s\n", i2c->dma_mode ? "on" : "off");
dev_debug() ?
> +
> return 0;
> }
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://ad.doubleclick.net/clk;258768047;13503038;j?
http://info.appdynamics.com/FreeJavaPerformanceDownload.html
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
