Doug Anderson wrote:
> 
> Mark or Kukjin,
> 
Hi,

> On Thu, Jun 12, 2014 at 8:59 PM, Naveen Krishna Chatradhi
> <ch.nav...@samsung.com> wrote:
> > Since, (3146bee spi: s3c64xx: Added provision for dedicated cs pin)
> >
> > spi-s3c64xx.c driver expects
> > 1. chip select gpios from "cs-gpio"(singular) under the
> >    "controller-data" node of the client/slave device of the SPI.
> >
> > 2. "cs-gpio"(singular) entry to be present in the SPI device node.
> >
> > Eg of current broken usage:
> > &spi_1 {
> >         cs-gpio <>;     /* this entry is checked during probe */
> >         ...
> >         slave_node {
> >                 controller-data {
> >                         cs-gpio <&gpioa2 5 0>;
> >                         /* This field is parsed during .setup() */
> >                 }
> >         };
> > };
> >
> > The following dts files which were using this driver. But,
> > din't have the "cs-gpio" entry under SPI node.
> > -- arch/arm/boot/dts/exynos4210-smdkv310.dts
> > -- arch/arm/boot/dts/exynos4412-trats2.dts
> > -- arch/arm/boot/dts/exynos5250-smdk5250.dts
> >
> > Also, the SPI core and many drivers moved on to using "cs-gpios"
> > from SPI node and removed the gpio handling code from drivers
> > (including spi-s3c64xx.c).
> >
> > Hence, spi-s3c64xx.c is broken since "Jun 21 11:26:12 2013" and
> > considering the time with no compliants about the breakage.
> >
> > We are assuming it is safe to remove the "cs-gpio"(singular) usage
> > from device tree binding of spi-samsung.txt and makes appropriate
> > changes in the driver to use "cs-gpios"(plural) from
> > SPI device node.
> >
> > Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
> > Acked-by: Rob Herring <r...@kernel.org>
> > Reviewed-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
> > Tested-by: Doug Anderson <diand...@chromium.org>
> > Cc: Tomasz Figa <t.f...@samsung.com>
> > ---
> > Changes since v4:
> > 1. Added reviewed by from Javier and Tested by from Doug
> >
> > Changes since v3:
> > 1. Remove the sdd->cs_gpio and use gpio_is_valid(spi->cs_gpio) instead
> > 2. Keep cs->line only for Non-DT platforms and use spi->cs_gpio
> >    for DT platforms
> >
> >  .../devicetree/bindings/spi/spi-samsung.txt        |    8 ++--
> >  drivers/spi/spi-s3c64xx.c                          |   41 
> > ++++++++------------
> >  2 files changed, 20 insertions(+), 29 deletions(-)
> 
> Is one of you two planning to apply (parts 1 and 2)?  I know that
> Kukjin needs to handle the part 3 (the .dts files)...
> 
Once Mark takes spi driver related patches, I will pick DT related patches into
samsung tree.

> Ideally it seems like it could go to 3.16 since it is a bugfix...
> 
I think so but it depends on Mark's comments ;-)

Thanks,
Kukjin


------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general

Reply via email to