After receiving the correct circlip for the one that seemed to be missing from my stub axle (!), I reassembled the suspension just awhile ago and was feeling quite pleased with myself -- until I tried to insert the bolts between the outer axle flange and diff flange. They can only be inserted one way, with the head of the bolt on the inside, otherwise, the threaded side will sheer off against the allen head bolts for the bearing retaining plate on the diff.
Only trouble is -- I see no way to insert the bolts because I can't gain the necessary clearance to insert them the correct way. Where did I go wrong here?? Was I supposed to bolt up the inner axle connection BEFORE I installed the vertical link and radius arm? As you might imagine, I'm none too happy right now. I see no other way around this problem, unless I'm missing something... TIA. Jeff /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
