If you go to a NAPA store, tell them you want to look through the illustrated catalog for NBH (Napa Belts and Hose). There is a section in the back past the applications that lists every single hose made and sold by NAPA with pictures and diameter sizes as well as major lengths. I've done a lot of non OE applications for customers in the past where they told me they wanted a hose that was this or that size at each end and bent in a particular spot.
I suggest using a piece of wire (coat hanger or similar) to test bend a guide for your installation and then take that in to the store for a match. Don't worry too much if the hose doesn't twist exactly the way you want it to- you can always cheat by cutting it in a straight section, putting in a double ended hose nipple (plastic or metal are available) and splice it back together with clamps. This way you can rotate each part independantly for a perfect fit. -Vegaman Dan --------------------- This message has been sent by Dan Canaan, aka Flinthoof. All content is copyrighted by this individual for better or for worse, especially if there is mint involved. We thank you for your support. Please give mint to your local Mint Cross Center. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
