I have three sets of front vertical links, competely dismantled and cleaned up. All three of the left hand ones are bent at the base of the threads. The lower trunion will screw down to 1/8" of the base on the three right hand vertical links. The trunnions don't screw down as far on the left hand vertical links and have gap of 1/4" on the inside and 3/8" on the outside. Is this merely coincidence or did the factory screw up when they cut the left hand threads? I have one front end I haven't dismantled yet, if it is the same as the other three, I would think it was a factory anomaly. Has anyone noticed this? Do I have three bent left hand vertical links?
Larry *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
