Sorry, You're right I forgot about the different nuts. My spare parts catalogue lists the correct nuts as PN 110366. I just checked TRF and they show them available at 79 cents each. They are double beveled and are much smaller than the disk wheel nuts. I thought I had some extras, but couldn't find them. Good luck! Pe
Thanks, Peter, I figured I'd do that, too, (although VB lists only one stud part number for all types of wheels) but my issue is with the nuts. I used PlayDoh to determine where the interference was, and the nuts are the immediate problem. VB lists part number 12-8046 as the correct nut for splined adapters, and part number 18-191 as the correct nut for stamped steel wheels (they also list 12-3687 for bolt-on wire wheels, but that's not what I have). I have some TR2-3-4 adapter nuts and the thickness is roughly half (too bad they're 7/16" instead of 3/8"). *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
