This is not a new installation of the Cam or Carb.  It
has been built about 2 years ago and it has recently
become a problem.  I am able to rev the engine without
a load on it, but I did not hold it there for very
long.  I will try the WD40 in the carb trick and also
check how much fuel is spurting out of the fuel line. 
The coil has only about 2 years worth of use on it,
but the doesn't mean that it couldn't have gone bad. 
By what most are recomending its probably a blockage
in the fuel line.  I have one of those glass fuel
filters and when I was reving the engine with the hood
up, the fuel level was slowely but shurly going down. 
I hope to have a chance to work on it this weekend, if
I do I'll post results.

Thanks
Eduard Tieseler
'66 Herald

Your messages not reaching the list?
Check out http://www.team.net/posting.html

===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

===  Help keep Team.Net on the air
===     http://www.team.net/donate.html

===  unsubscribe/change address requests to [EMAIL PROTECTED]  or try
===  http://www.team.net/cgi-bin/majorcool
===  Other lists available at
===      http://www.team.net/mailman/listinfo
===  Archives at http://www.team.net/archive
===  http://www.team.net/the-local
===  Edit your replies!

Reply via email to