I made a small aluminum bracket that attached at the upper wishbone (sorry I don't have a good pic of this). Basically just an L shaped bracket with a hole in the end that the bottom of the spring is attached to. I have two coil springs (one nested inside the other) as a safety measure. Both are pretty stiff on thier own, together, they give me a nice firm pedal. I've never had a stuck throttle, and I am doing what I can to insure I never do.
John On 3/2/06, Tim Schuh <[EMAIL PROTECTED]> wrote: > What do you have your throttle return spring attached to? My current > trottle setup should allow full throttle once I've trimmed the throttle Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!