Hello Daniel, all,
SPLASH is wonderful, and I've used it for many years. Recently, I started
getting a new error, and I don't know what changed to cause this. The
message is "error: could not find closest sink particle, using origin
instead", and it prevents me from progressing through the snapshots when by
pressing n. I can see the first snapshot with no problem, but as soon as I
press n to advance, the error comes up and the same snapshot is
re-rendered. After upgrading to the latest SPLASH version, I get the same
behavior. I also get the same behavior regardless of whether there are
only gas particles (type 1) or both gas particles and a compact object
particle (type 2) in the simulation. Output with SPLASH_DEBUG=true is
appended below up until the point of the error, which occurs immediately
after I press n.
Daniel, I'll mention that you added StarSmasher file format to the latest
version of SPLASH (thank you!!). I emailed you a sample out file on Feb.
22, 2020. When I tested my previous and new version of SPLASH on duplicate
copies of that sample out file today, both versions showed this error, even
though I know the previous version worked for me earlier. I'm not sure
what I broke...
Thank you for any guidance you can offer!
Regards,
Jamie
$ splash -f starsmasher out0000.sph out0001.sph
_ _ _ _ _
_(_) ___ _ __ | | __ _ ___| |__ (_) _ (_)
_ (_) _ / __| '_ \| |/ _` / __| '_ \ _ (_)
(_) _ (_) \__ \ |_) | | (_| \__ \ | | | _ (_) _
(_) _ |___/ .__/|_|\__,_|___/_| |_| (_) _ (_)
(_) (_)|_| (_) (_) (_)(_) (_)(_) (_)(_)
( B | y ) ( D | a | n | i | e | l ) ( P | r | i | c | e )
( v3.0.1 [27th Aug 2020] Copyright (C) 2005-2020 )
* SPLASH comes with ABSOLUTELY NO WARRANTY.
This is free software; and you are welcome to redistribute it
under certain conditions (see LICENCE file for details). *
http://users.monash.edu.au/~dprice/splash
[email protected] or [email protected]
Please cite Price (2007), PASA, 24, 159-173 (arXiv:0709.0832) if you
use SPLASH in print and don't forget to send pics for the gallery
splash.defaults not found: using default settings
2 filenames read from command line
----------------------- out0000.sph -----------------------
time : 1.6192798439320789E-002
N_total : 99954
N data columns : 13
>> last step ntot = 99954
DEBUG: ncolumns from data read = 13
DEBUG: nsteps in file = 1
splash.units not found
setting plot limits: steps 1-> 1 cols 1-> 13
warning: mean_mu min = max = 1.03E-24
DEBUG: numplot = 13 ncalc = 0 ndataplots =
13
You may choose from a delectable sample of plots
-------------------------------------------------------
1) x 8) density
2) y 9) specific internal en
3) z 10) mean_mu
4) v\dx 11) h
5) v\dy 12) du/dt
6) v\dz 13) temperature
7) particle mass
-------------------------------------------------------
14) multiplot [ 4 ] m) set multiplot
-------------------------------------------------------
d(ata) p(age) o(pts) l(imits) le(g)end h(elp)
r(ender) v(ector) x(sec/rotate) s,S(ave) q(uit)
-------------------------------------------------------
Please enter your selection now (y axis or option):2
(x axis) (default=1):
(render) (0=none) ([0:13], default=0):
(vector plot) (0=none, 4=v) ([0:4], default=0):
DEBUG: iplotz = 3
DEBUG: imulti = F iamrendering = F
DEBUG: required(1:ncolumns) = T T T F F F F F F F F F F
Graphics device/type (? to see list, default /xw):
----- t = 0.02, dump # 1 ------------------
DEBUG: in plotstep, allocating local memory...
DEBUG: in plotstep, allocated local memory successfully
DEBUG: itracktype = 0 itrackoffset = 0
DEBUG: interpolation weights not set because no rendering...
DEBUG: querying colour index range
DEBUG: setting colour table
DEBUG: querying colour table
using colour scheme red
DEBUG: finished colour_set
DEBUG: starting frame loop...
DEBUG: initialising data plots... T T 1 2 99954
99954
DEBUG: iplotz = 3
DEBUG: setting itrans...
DEBUG: 1 : xmin,max adaptive = -0.82873678084526980
0.82873678084526936
DEBUG: 2 : ymin,max adaptive = -0.82559914511449506
0.82559914511449528
DEBUG: starting coord plot...
DEBUG: entering page setup
x min, max = -.82873678084526980 .82873678084526936
y min, max = -.82559914511449506 .82559914511449528
DEBUG: calling setpage... 1
DEBUG: xmin,xmax,ymin,ymax= -0.82873678084526980
0.82873678084526936 -0.82559914511449506 0.82559914511449528
DEBUG: printing axes T T 1 1 1
DEBUG: setpage ok, querying and saving viewport...
DEBUG: finished page setup
DEBUG: starting particle plot with 99954 particles
-0.11941106894581849 -9.2874214057261817E-002
-6.6338128534802435E-002 -3.9802731272709689E-002
-1.3267613468660570E-002 1.3267542630963939E-002
3.9802939503670288E-002 6.6339152559756712E-002
9.2875986361419666E-002 -0.14594748574426214 1 1
1 1 1 1 1 1
1 1 99954 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 T F F F F F F F F F F F F F F F F F F F F F F F
fast-plotted 99954 of 99954 gas particles
-------------- interactive mode commands -----------------------------
SPACE BAR : skip to next timestep/file
0,1,2,3..9 and click : go forward/back n timesteps (back=r.click)
left click (or A) : zoom/select
right click (or X or b) : previous timestep
shift+left click : IRREGULAR particle selection
left click on colour bar : change rendering limits
+/- : zoom IN/OUT (_ for out by 20%)
a : (a)dapt plot limits (inside box, over axes or colour bar)
l : (l)og / unlog axis (over x/y axis or colour bar)
o/C/n : re-centre plot on (o)rigin/(C)ursor/(n)earest sink position
backspace: delete annotation (over axes, legend, title or colour bar)
r : (r)eplot current plot
R : (R)eset/remove all range restrictions
p/c : label closest (p)article/plot (c)ircle of interaction
t : t)rack closest particle/turn tracking off (coord plots only)
g : plot a line and find its g)radient
ctrl-t : add text annotation at current position
ctrl-m : toggle Hollywood mode
G/T/H : move le(G)end, (T)itle or (H) vector legend to current position
m/M/i : change colour map (m=next,M=previous,i=invert) (rendered plots
only)
v/V/w : decrease/increase/adapt arrow size on vector plots (Z for x10)
k/K : decrease/increase opacity on opacity-rendered plots (Z for x10)
e/E : use current frame/settings as end point to animation sequence
, . < > : rotate about z axis by +(-) 15,30 degrees (coord plots only)
[ ] { } : rotate about x axis by +/- 15,30 degrees (coord plots only)
/ \ ? | : rotate about y axis by +/- 15,30 degrees (coord plots only)
x : take cross section (coord plots only)
u/U/d/D : move cross section/perspective pos. up/down (towards/away from
observer)
s : (s)ave current settings for all steps
q/Q/esc : (q)uit plotting
z/Z(oom) : timestepping, zoom and limits-changing multiplied by 10
----------------------------------------------------------------------
error: could not find closest sink particle, using origin instead
--
You received this message because you are subscribed to the Google Groups
"SPLASH users forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/splash-users/b46e739a-39cd-4eae-9710-8ca16b7990c2n%40googlegroups.com.
