Andy, RFC 6119 defines ipv6 router-id . It is not mandatory to advertise IPv4 router-id in ISIS.
Rgds Shraddha From: spring <spring-boun...@ietf.org> On Behalf Of Andy Smith (andsmit) Sent: Monday, September 9, 2019 10:07 PM To: Ron Bonica <rbonica=40juniper....@dmarc.ietf.org> Cc: SPRING WG List <spring@ietf.org>; 6...@ietf.org; Gyan Mishra <hayabusa...@gmail.com>; Robert Raszuk <rob...@raszuk.net>; Rob Shakir <ro...@google.com>; Tarek Saad <tsaad....@gmail.com> Subject: Re: [spring] Beyond SRv6. Ron, Doesn't ISIS require a quad octet / 32 bit / IPv4 address for it's router ID? So you can't really build an ipv4 'free' network. Not 100% anyway. Andy On Sep 9, 2019, at 12:21 PM, Ron Bonica <rbonica=40juniper....@dmarc.ietf.org<mailto:rbonica=40juniper....@dmarc.ietf.org>> wrote: Hello Gyan, Amplifying what you have said….. There is no reason why SR-MPLS shouldn’t work over an IPv6 only infrastructure. So long as every node is MPLS capable, SR-MPLS should not require IPv4 to be enabled. Ron Juniper Business Use Only From: Gyan Mishra <hayabusa...@gmail.com<mailto:hayabusa...@gmail.com>> Sent: Sunday, September 8, 2019 3:20 AM To: Robert Raszuk <rob...@raszuk.net<mailto:rob...@raszuk.net>> Cc: Srihari Sangli <ssan...@juniper.net<mailto:ssan...@juniper.net>>; SPRING WG List <spring@ietf.org<mailto:spring@ietf.org>>; 6...@ietf.org<mailto:6...@ietf.org>; Zafar Ali (zali) <z...@cisco.com<mailto:z...@cisco.com>>; Rob Shakir <ro...@google.com<mailto:ro...@google.com>>; Ron Bonica <rbon...@juniper.net<mailto:rbon...@juniper.net>>; Tarek Saad <tsaad....@gmail.com<mailto:tsaad....@gmail.com>> Subject: Re: [spring] Beyond SRv6. As an operator of a Tier 1 provider with massive mpls networks I think our traditional bread and butter “mpls” will be around for a very very long time as is IPv4 if not longer. Most all service provider cores run greater then or equal to MTU 9000 mpls cores to account for mpls overhead shims being tacked on plus edge overhead from possible GRE tunneling or IPSEC so in general making the core the maximum Jumbo MTU supported by most vendors at 9216 is what is generally done out in the field. So for SRv6 support of multiple or many EH insertions is really a non issue for most operators. From reading through all the discussion threads the SR insertion is two fold one being for FRR capabilities using Ti-LFA or remote LFA tunnel so end up requiring double EH insertions on the Ingress PE tunnel head end SRv6 source node and then second scenario being a possible EH insertions occurrence on intermediate nodes. I have not read through the drafts or RFC regarding Ti-LFA with SR but since that is an IGP extension I am guessing an opaque LSA and is not the traditional MPLS FRR link/node/path protection that adds an additional mpls shim so not sure why an EH insertion needs to occur for Ti-LFA. Can someone clarify that use case for me. Also the EH insertion on intermediate node what is the use case or reason for that. My guess is it’s for special use case of stitching SRv6 domains together. Please clarify. I do agree with some of the other operators on the marketing hype and push for SR-MPLS and SRv6 is not for every service provider as goes the mantra ..”if it’s not broken..don’t try to fix it..leave it alone” and I think you can definitely say that for MPLS as it has had a SOLID run for service providers since the 90’s ever since ATM and frame relay were put to rest so I don’t think that it’s going away any time soon. I think it would be a serious mistake and sad state of affairs for vendors to push SR-MPLS and SRv6 and stop development and support of MPLS as that would really pigeon hole all operators into one technology which does not fit the bill for every use case out there. The mention of SR-MPLS pulling support for IPv6 and forcing operators to go with SRv6 is a wrong move for vendors and would really limit operators with flexibility to chose based on their use case to stay with traditional mpls or go with with SR-MPLS or SRv6 only if necessary with their unique use case warrants.. I think SR-MPLS and SRv6 should be marketed by vendors and the industry as yet another tool in our operator “design toolbox” to use as we see fit or not use but not be forced into it. There are particular use cases for SR-MPLS for migration from existing LDP and the downside of having state maintained in the core is not a downside as the P and PE nodes have to be provisioned anyway so their is no savings in pulling mpls LDP/mLDP with SR-MPLS “Sr-prefer” and ditching LDP. I think the major use case for SR-MPLS and SRv6 is coloring per-vrf TE feature for L3 VPNs steering without adding complexity of adding ibgp loopback egress PE FEC next hop to traffic engineer L3 VPN traffic. That is a unique use case and not every major service provider has that requirement so if you don’t their really is no need to jump on the SR band wagon and you can stay put with the tried and true mpls that has been around for decades and is not going away any time soon. SRv6 has a more ubiquitous all encompassing use case that could serve for MPLS core replacement or on the public internet or for enterprise network traffic engineering of flows between data centers or access to data center and an alternative to SD WAN application based routing solutions. But here as well the use case benefit has to exist. Nobody wants to be forced into it if it’s unnecessary added complexity. My 2 1/2 cents Regards, Gyan Mishra Verizon Communications Cell- 301 502-1347 Sent from my iPhone On Sep 6, 2019, at 10:17 AM, Robert Raszuk <rob...@raszuk.net<mailto:rob...@raszuk.net>> wrote: I don't think so. In OAM packets are on purpose made huge - even up to MTU to make sure real customer packets can go through or to detect and diagnose MTU issues. So adding SRH to it is nothing one can call inefficient. Wrong tree :) Cheers, R. On Fri, Sep 6, 2019 at 4:14 PM Srihari Sangli <ssan...@juniper.net<mailto:ssan...@juniper.net>> wrote: On 06/09/19, 4:32 PM Robert Raszuk from rob...@raszuk.net<mailto:rob...@raszuk.net> said > Not really. Only SR OAM packets may need it. Is that a real problem ? Thanks for clarification. Like Ron pointed out before, its inefficient encoding. srihari… _______________________________________________ spring mailing list spring@ietf.org<mailto:spring@ietf.org> https://www.ietf.org/mailman/listinfo/spring<https://urldefense.com/v3/__https:/www.ietf.org/mailman/listinfo/spring__;!8WoA6RjC81c!QmUWmBSwMeAovLUIjU_O2tFmWCZOPQmNOWvSTsaRgHjWkA0is1xv2wNVKz9IevQp$> -------------------------------------------------------------------- IETF IPv6 working group mailing list i...@ietf.org<mailto:i...@ietf.org> Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6 --------------------------------------------------------------------
_______________________________________________ spring mailing list spring@ietf.org https://www.ietf.org/mailman/listinfo/spring