Dear WG:
I strongly support the adoption.
We implemented the C-SID solution, and it works very well. From an design
engineers perspective, CSID is a single SRv6 based data plane solution.
The draft is ready for the WG adoption.
Thanks!
Changwang Lin
New H3C.
发件人: spring [mailto:[email protected]] 代表 James Guichard
发送时间: 2021年10月1日 22:05
收件人: SPRING WG
抄送: [email protected]
主题: [spring] WG Adoption call for
https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/
Dear WG:
The chairs would like to express their appreciation for all the responses
received to our emails with reference to how the working group wishes to move
forward with respect to a solution for SRv6 compression.
The apparent inclination of the working group is to use
https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/
as the basis for its compression standardization work. That is part of what
this email attempts to confirm.
Because of the above the chairs would like to issue a 2-week WG call for
adoption ending October 15th for
https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/
but with some clear guidelines as follows. By expressing support for adoption
of this document you are fully aware of and are acknowledging that:
1. The SPRING working group is adopting a document that has multiple SRv6
Endpoint behaviors.
2. The document is a “living” document; it may change as it goes through
review and analysis by the SPRING working group.
3. All open discussion points raised on our mailing list MUST be addressed
BEFORE said document is allowed to progress from the working group to
publication. A list of these discussion points will be documented in the WG
document and maintained by the document editor in conjunction with the chairs.
4. If this document is adopted by the working group, the chairs specify as
part of the adoption call that the following text describing an open issue be
added to the document in the above-described open issues section:
* "Given that the working group has said that it wants to standardize
one data plane solution, and given that the document contains multiple SRv6
EndPoint behaviors that some WG members have stated are multiple data plane
solutions, the working group will address whether this is valid and coherent
with its one data plane solution objective.".
Please consider the above guidelines as you decide on whether to support or not
this WG adoption. Please express clearly your reasoning for support/non-support
as well as any open discussion points you would like addressed should the
document be adopted into the working group.
Thanks!
Jim, Bruno & Joel
-------------------------------------------------------------------------------------------------------------------------------------
本邮件及其附件含有新华三集团的保密信息，仅限于发送给上面地址中列出
的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
邮件！
This e-mail and its attachments contain confidential information from New H3C,
which is
intended only for the person or entity whose address is listed above. Any use
of the
information contained herein in any way (including, but not limited to, total
or partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify
the sender
by phone or email immediately and delete it!
_______________________________________________
spring mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/spring
