I support the adoption of draft-filsfilscheng-spring-srv6-srh-compression. I have been working together with my team at the university of Rome Tor Vergata on SRv6 support in the Linux kernel.
The CSID draft builds on RFC8986 and defines two new flavors. We supported these two flavors in the Linux kernel by re-using the same infrastructure developed to support the flavors defined in RFC8986. Which confirms that the new flavors build on the single dataplane (SRv6 dataplane). Thanks Paolo > Il giorno 01 ott 2021, alle ore 16:04, James Guichard > <[email protected]> ha scritto: > > Dear WG: > > The chairs would like to express their appreciation for all the responses > received to our emails with reference to how the working group wishes to move > forward with respect to a solution for SRv6 compression. > > The apparent inclination of the working group is to use > https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ > as the basis for its compression standardization work. That is part of what > this email attempts to confirm. > > Because of the above the chairs would like to issue a 2-week WG call for > adoption ending October 15th for > https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ > but with some clear guidelines as follows. By expressing support for > adoption of this document you are fully aware of and are acknowledging that: > > • The SPRING working group is adopting a document that has multiple > SRv6 Endpoint behaviors. > • The document is a “living” document; it may change as it goes through > review and analysis by the SPRING working group. > • All open discussion points raised on our mailing list MUST be > addressed BEFORE said document is allowed to progress from the working group > to publication. A list of these discussion points will be documented in the > WG document and maintained by the document editor in conjunction with the > chairs. > • If this document is adopted by the working group, the chairs specify > as part of the adoption call that the following text describing an open issue > be added to the document in the above-described open issues section: > • "Given that the working group has said that it wants to > standardize one data plane solution, and given that the document contains > multiple SRv6 EndPoint behaviors that some WG members have stated are > multiple data plane solutions, the working group will address whether this is > valid and coherent with its one data plane solution objective.". > > Please consider the above guidelines as you decide on whether to support or > not this WG adoption. Please express clearly your reasoning for > support/non-support as well as any open discussion points you would like > addressed should the document be adopted into the working group. > > Thanks! > > Jim, Bruno & Joel > > > _______________________________________________ > spring mailing list > [email protected] > https://www.ietf.org/mailman/listinfo/spring _______________________________________________ spring mailing list [email protected] https://www.ietf.org/mailman/listinfo/spring
