SPRING chairs,

If consensus emerges to move this work forward in the working group please
do notify 6MAN, its chairs and ADs.  6MAN will likely want to assess SIDs
as source addresses (and may even want to comment explicitly in
draft-ietf-6man-sids
<https://datatracker.ietf.org/doc/html/draft-ietf-6man-sids> while that
document is still within the working group).

Thank you,
-Erik

On Sat, Mar 11, 2023 at 7:23 PM linchangwang <linchangwang.04...@h3c.com>
wrote:

>
> Hi all,
>
> [draft-yang-spring-sid-as-source-address-00] describes a method of using
> SID as source address for SRv6 traffic, also identifies solution for
> several use cases.
>
> In SRv6 network, the SRv6 packets usually use loopback address a source
> address. However, when there is symmetric traffic requirement for
> bidirectional flow,
>  or there is requirement for traffic source validation, using loopback
> address as source address is not sufficient.
>
> Use cases for using SID as source address for SRv6 Newtork:
> 1. SRv6 Network with SR-aware Stateful Firewall
> 2. Source Validation Solution for SRv6 Network
>
>
> Document Link:
>
> https://datatracker.ietf.org/doc/html/draft-yang-spring-sid-as-source-address-00
>
> We are looking forward to receiving more comments and suggestions.
>
>
> Best,
> Changwang
>
>
> -----Original Message-----
> From: I-D-Announce [mailto:i-d-announce-boun...@ietf.org] On Behalf Of
> internet-dra...@ietf.org
> Sent: Sunday, March 12, 2023 10:37 AM
> To: i-d-annou...@ietf.org
> Subject: I-D Action: draft-yang-spring-sid-as-source-address-00.txt
>
>
> A New Internet-Draft is available from the on-line Internet-Drafts
> directories.
>
>    Title           : SID as source address in SRv6
>    Authors         : Feng Yang
>                      Changwang Lin
>                      Yuanxiang Qiu
>                      Mengxiao Chen
>    Filename        : draft-yang-spring-sid-as-source-address-00.txt
>    Pages           : 16
>    Date            : 2023-03-11
>
> Abstract:
>    In SRv6 network, the SRv6 packets usually use loopback address as
>    source address. However, when there is symmetric traffic requirement
>    for bidirectional flow, or there is requirement for traffic source
>    validation, using loopback address as source address is not
>    sufficient. This document proposes using SID as source address for
>    SRv6 traffic, also identifies solution for several use cases.
>
> The IETF datatracker status page for this Internet-Draft is:
> https://datatracker.ietf.org/doc/draft-yang-spring-sid-as-source-address/
>
> There is also an htmlized version available at:
>
> https://datatracker.ietf.org/doc/html/draft-yang-spring-sid-as-source-address-00
>
> Internet-Drafts are also available by rsync at rsync.ietf.org:
> :internet-drafts
>
>
> _______________________________________________
> I-D-Announce mailing list
> i-d-annou...@ietf.org
> https://www.ietf.org/mailman/listinfo/i-d-announce
> Internet-Draft directories: http://www.ietf.org/shadow.html
> or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>
> -------------------------------------------------------------------------------------------------------------------------------------
> 本邮件及其附件含有新华三集团的保密信息,仅限于发送给上面地址中列出
> 的个人或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、
> 或散发)本邮件中的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本
> 邮件!
> This e-mail and its attachments contain confidential information from New
> H3C, which is
> intended only for the person or entity whose address is listed above. Any
> use of the
> information contained herein in any way (including, but not limited to,
> total or partial
> disclosure, reproduction, or dissemination) by persons other than the
> intended
> recipient(s) is prohibited. If you receive this e-mail in error, please
> notify the sender
> by phone or email immediately and delete it!
> _______________________________________________
> spring mailing list
> spring@ietf.org
> https://www.ietf.org/mailman/listinfo/spring
>
_______________________________________________
spring mailing list
spring@ietf.org
https://www.ietf.org/mailman/listinfo/spring

Reply via email to