Hi WG,
I have reviewed this draft. It provides a method for the application
such as bidirectional tunnel binding, network performance measurement and so
on. I think it's mature and completed. Hope it could be moved forward quickly.
Thanks.
Best regards,
Haojie Wang
China Mobile Research Institute
Department of Fundamental Network Technology
[email protected]
From: Cheng Li
Date: 2024-09-02 23:45
To: [email protected]
CC: [email protected]
Subject: [spring] Request for MORE reviews of
draft-ietf-spring-srv6-path-segment-09
Hi SPRING,
The SR-MPLS Path Segment draft has been published as RFC9545, and we think the
content of SRv6 Path Segment draft is quite stable and mature, so we hope to
see more tech reviews on it so that we can move the draft forward.
The draft is quite simple and straightforward, and it defines a new type of
segment called Path Segment, which is useful to identify an SRv6 path, similar
to SR-MPLS path segment.
The draft only defines the location that the SRv6 Path Segment should appear,
the possible general formats of it, and the general handling of Path Segment.
How to allocate the value to a Path Segment is out of the scope of this draft
and should be defined as per use cases.
An SRv6 Path Segment will not be used for routing so it should not be copied to
the IPv6 destination address.
Many thanks for Adrian, Stefano and Zafar for their useful comments and help on
this draft. More reviews and comments are welcome!
Thanks,
Cheng
-----Original Message-----
From: [email protected] <[email protected]>
Sent: Monday, September 2, 2024 5:15 PM
To: [email protected]
Cc: [email protected]
Subject: [spring] I-D Action: draft-ietf-spring-srv6-path-segment-09.txt
Internet-Draft draft-ietf-spring-srv6-path-segment-09.txt is now available. It
is a work item of the Source Packet Routing in Networking (SPRING) WG of the
IETF.
Title: Path Segment for SRv6 (Segment Routing in IPv6)
Authors: Cheng Li
Weiqiang Cheng
Mach(Guoyi) Chen
Dhruv Dhody
Yongqing Zhu
Name: draft-ietf-spring-srv6-path-segment-09.txt
Pages: 13
Dates: 2024-09-02
Abstract:
Segment Routing (SR) allows for a flexible definition of end-to-end
paths by encoding an ordered list of instructions, called "segments".
The SR architecture can be implemented over an MPLS data plane as
well as an IPv6 data plane.
Currently, Path Segment has been defined to identify an SR path in
SR-MPLS networks, and is used for various use-cases such as end-to-
end SR Path Protection and Performance Measurement (PM) of an SR
path. This document defines the Path Segment to identify an SRv6
path in an IPv6 network.
The IETF datatracker status page for this Internet-Draft is:
https://datatracker.ietf.org/doc/draft-ietf-spring-srv6-path-segment/
There is also an HTMLized version available at:
https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-path-segment-09
A diff from the previous version is available at:
https://author-tools.ietf.org/iddiff?url2=draft-ietf-spring-srv6-path-segment-09
Internet-Drafts are also available by rsync at:
rsync.ietf.org::internet-drafts
_______________________________________________
spring mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
spring mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
spring mailing list -- [email protected]
To unsubscribe send an email to [email protected]
