Where will the advantage come from using the room design method? Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cliff Whitfield Sent: Wednesday, February 21, 2007 4:25 PM To: sprinklerforum@firesprinkler.org Subject: Room design method I am working on a retrofit project (church) that is requiring a dry system. I am looking at the using the room design method for my calcs. Is there any reason that this will not work for a dry system? The only thing I can find is a line in the annex that says the increases or decreases allowed or required by 11.2.3.2 do not apply. This would tend to make one think that using this in a dry system is acceptable. What think ye? Cliff Whitfield Fire Design, Inc. 3784 Holly Ridge Trail Marianna, FL 32448 _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum