ICC has Plans Examiner classes and certification programs as well for those
on the UFC / IFC, won't be a great help with 13 and 14, but will provide the
training in the basic process.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: "Cipriani, Daniel" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, March 12, 2007 11:07 AM
Subject: RE: RECOMMeNDATIONS FOR TRAINING
George,
As usual, a lot of food for thought! I will investigate several of your
leads. We had this opening posted for months, and the NICET certified
weren't breaking down our doors. Under the UCC, the only certification
needed to review fire protection systems is the "Building Plans
Examiner", which may explain some of the issues you encounter with PA
ahjs.
Thanks for your reply,
Dan Cipriani
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of George
Church
Sent: Monday, March 12, 2007 12:41 PM
To: [email protected]
Subject: RE: RECOMMeNDATIONS FOR TRAINING
Robert Gagnon has a revised edition of one of his books coming out soon,
which will probably address the out of date complaint Scott has.
FPS's CalcReview software is a slick program that walked a plan reviewer
thru the decision trees of what to watch for in reviewing calcs, based
on the data entered- along with a database to ease responses, track who
has their plans bounced most often, etc. It died quietly since the AHJ's
weren't beating our doors down, and the principals were too busy with
their "A" jobs in sprinkler to devote enough time to marketing it. We're
toying with the idea of funding a revision, but I wouldn't hold my
breath- we tend to have more great ideas than time to implement them,
and our "A" jobs are still pretty demanding. Too bad, those that use it
have told us they love it :(
AFSA HQ in their new location in Dallas could tell you if their
Sprinkler Planning Course would be appropriate for your guy; one would
think if he got a good handle on what it takes to design a system, he
could review dwgs for various hazards a lot better and this would give
him a good overview of the design process.
Another source of training for you would be the National Fire Academy,
not too far from Pgh, and I believe they are working on a Plan Review
education module at this time.
We ran a Plan Review Seminar for 42 AHJs and 3rd Parties in December,
and the comments we received indicated they knew they knew little about
sprinklers, and after our seminar, they knew there was a lot more they
didn't know than they thought there was. Doesn't really give you a warm
and fuzzy feeling about the Inspector being the last guy between an
ignorant or knowingly wrong installation and the Public's safety, does
it?
Finally, and I hope Officer Muncy is busy and not overseeing this, is
that the "other guys" (NFSA) have a 2-day plan review seminar your guy
could attend, and maybe since you're an AHJ they could get you other
resources from them that will suit your needs. Since the grandfather
stage for a lot of AHJs in PA is rapidly approaching, there will either
be a glut of townships turning the work back to L&I - or a lot of 3rd
parties will be busier than they are now. And I really hope that many of
them take some sort of plan review course, because we are creeping up on
the point of going postal with ridiculous comments from many of them now
reviewing our
submissions- imagine our surprise when we discovered that wet sprinkler
zones are now limited to 22,000 sf each- we thought we'd have heard
about this from our participation in the code process or here on the
Forum !!!!
As Robin said, "Holy Misapplication of Code, Batman! Things will get
worse before they get better!".
George Church
Rowe Sprinkler
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott A.
Futrell
Sent: Monday, March 12, 2007 10:47 AM
To: [email protected]
Subject: RE: RECOMMANDATIONS FOR TRAINING
I would add to Ron's list that Gagnon's book is very good, but a little
out of date. Gagnon wrote another one, "Designer's Guide to Automatic
Sprinkler Systems", published by SFPE and NFPA and it is more up-to-date
with NFPA 13, 2002 edition.
Scott
(763) 425-1001 Office
(612) 759-5556 Cell
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ron
Greenman
Sent: Sunday, March 11, 2007 12:02 PM
To: [email protected]
Subject: Re: RECOMMANDATIONS FOR TRAINING
Dan,
I see you've gotten nothing too specific so far. I'm not going to do you
much better at this time but a few things come to mind. First if you
look at NFPA 1031 there are specific knowledges and skills enumerated as
essential to plans examiners at levels 1 & 2. You may want to use this
as a guideline. I suppose I should make some disclaimer that I'm a
member of the 1031 committee. I should also mention that substantial
changes in language are on the horizon for the next edition. There used
to be a software program available from a company called FPS. The
program is CalcReview and was a guideline to aid reviewers in checking
the calculation process. It appears their website is shut down though.
You could check this out at NFPA--"Fire Plan Examiner Candidate
Handbook." IFSTA has--"Plans Examiner for Fire and Emergency Services."
For learning how sprinkler systems are designed I'd recommend Robert
Gagnon's "The Design of Water Based Fire Protection Systems" and Mark
Bromann's "The Design and Layout of Fire Sprinkler Systems, Second
Edition." AFSA also has a very good correspondence course on sprinkler
design. I've taken it and it is rigorous as is their course for NFPA 25
type inspection. I know the former is currently being updated and the
version I took was a little long in the tooth. I have a book at work
that is a specifically for fire plan review but the title escapes me.
I'll look for it for you. Don't know if it's still in print or not. If
you're an IBC/IFC state ICC has many training opportunities. Finally, if
you weren't 3000 miles away we could probably work something out but the
commute would kill your neophyte. With that in mind though you might
want to contact Bob Forracker at Delaware Technical College in Stanton.
Also, feel free to contact me off list if you like.
On 3/10/07, Cipriani, Daniel <[EMAIL PROTECTED]>
wrote:
I would appreciate the groups feedback on this issue. I have a new
employee that will (eventually) be responsible for reviewing
sprinkler/standpipe submittals for permitting. He does not have a
background in this area, and I am looking for the most appropriate
training for this purpose. Please offer your opinions regarding what
seminars, textbooks, online training that you would recommend/not
recommend.
Thank you in advance,
Dan Cipriani
Fire Prevention Administrator
City of Pittsburgh _______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
--
Ron Greenman
at home....
_______________________________________________
lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum