I thought it might go to EH2 too if it were treated like manufactured homes with a combustible finished enclosure. I will have to check in to this further. Thanks, Dewayne
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Williams - work Sent: Monday, April 09, 2007 4:22 PM To: [email protected] Subject: Re: Fiberglass boat manufacturing occupancy You may want to do a little more digging into how the whole system works. Both polyester and epoxy resins are flammable liquids (at least the ones in my garage are). If there is a spraying or flow coating operation, the hazard could go to EH2. Also, depending on what kind of boats, you may have large cabins which could create a shielded fire issue. Be aware of raw material storage and distribution as well. The fumes from this type of operation are not only flammable, but produce a serious health hazard, so there may be an exhaust system that could require duct sprinklers. There's a lot to think about. At 03:35 PM 4/9/2007, you wrote: >Would this be classified as OH II (resin application)? >Thanks, >Dewayne >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > >To Unsubscribe, send an email >to:[EMAIL PROTECTED] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut 860-535-2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
