Regarding the manufacturing portion - if the wax is heated to a temperature at or above its flashpoint AND it is not a closed process (open vats or something), then EH-II would be prudent. J. Scott Mitchell, P.E.
David Phelan <[EMAIL PROTECTED]> wrote: Greetings ... Could anyone offer some ideas on the Occupancy Classification for a 3,000 tenant space in a sub-divided industrial building where the tenant takes blocks of parrafin wax and after heating, coloring, processing, and such makes finished candles for mail order shipment. The design professional is indicating that this is an OH-2 and is choosing .2 gpm/ft over 1500 for his design curve. This limits the storage height to 5 feet which will be a matter for later enforcement ..... Using the appendix the commodity classification makes it a Group A plastic, but if they went occupancy classification since its under 12 foot storage wouldnt this be closed to an Extra 1 class? Any thoughts or experiences to relate ? Dave P. An AHJ in NJ _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos. _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
