Maybe inspecting/replacing cathodes by having to drain the tank? R/ Matt
Matthew J. Willis Living Water Fire Protection, LLC. 1160 McKenzie Rd. PO Box 877 Cantonment, FL. 32533 850-937-1850 Voice 850-937-1852 Facsimile [EMAIL PROTECTED] ----- >-----Original Message----- ----- >From: [EMAIL PROTECTED] ----- >[mailto:[EMAIL PROTECTED] On ----- >Behalf Of Todd Williams - work ----- >Sent: Wednesday, May 23, 2007 4:40 AM ----- >To: [email protected] ----- >Subject: Cathodic protection of tanks ----- > ----- >I am working on a project where two steel tanks are to ----- >be used for a suction source for a pump. They are new, ----- >but were not designed to meet NFPA 22 standards and are ----- >to be converted. The only problem is the priming and ----- >painting of these tanks is not practical. The supplier ----- >has proposed using a cathodic protection on the interior. ----- >NFPA 22 seems to allow it subject to AHJ approval. Are ----- >there any problems with this that I should be aware of? ----- > ----- >Todd G. Williams, PE ----- >Fire Protection Design/Consulting ----- >Stonington, Connecticut ----- >860-535-2080 ----- >www.fpdc.com ----- > ----- >_______________________________________________ ----- >Sprinklerforum mailing list ----- >[email protected] ----- >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum ----- > ----- >To Unsubscribe, send an email ----- >to:[EMAIL PROTECTED] ----- >(Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
