You would obviously NOT be responsible for anything that was accepted by the Building Official at ORIGINAL install. You WOULD be responsible for ensuring that any modifications to the existing system complied with the applicable codes. Forest Cherokee Fire
I have a question that I think I know the answer to but, don't want to accept it yet, so I'd like to get some outside opinions. Here's what happened. We just completed a small remodel project on a wet, pond fed system. We only had to alter the office area of a storage facility. It was around two dozen heads in all. A dozen heads on the first floor, and a dozen heads on the second floor. The existing system DID NOT have return bends to feed these pendent heads. On the first floor we simply re-swung the arm-overs to accommodate a new ceiling layout. On the second floor we added three new branchlines, each on an eight inch riser nipple, and kept the existing pipe schedule. I can't remember if we tore out the existing branchlines, or if we just left them above the ceiling (I don't hear much about projects once they leave my office). I had never designed a pond-fed system before, and I simply overlooked return bends. We have completely finished this project. Yesterday we received a fax pointing out our error that return bends were not installed, and telling us to fix them. So having said all that (clear as mud right?), do we need the return bends? Is it our responsibility to correct that mistake on a previously accepted system? If we had done a lot of changes, then I think it would be different; but we just relocated the heads that were already there. Are there any other exceptions other than 8.14.18.3 and 8.14.18.4 of the '02 ED. (8.15.18.3 and 8.15.18.4 of the '07 ED.)? Basically do we have any other options, other than taking the loss and fixing the arm-overs? If you do think we have to fix them, do you think we should have fix both floors or just second? ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
