Cliff, Thanks for the tip, I knew it had to be covered somewhere in the book....
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cliff Whitfield Sent: Wednesday, October 03, 2007 11:44 AM To: [email protected] Subject: RE: Soffit Question Brian, Look at figure 8.6.4.1.1.3 in 2007. That should address your question. Cliff Whitfield Fire Design, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Harris Sent: Wednesday, October 03, 2007 10:18 AM To: [email protected] Subject: Soffit Question I'm working on a job that has a "tin roof" soffit around the inside perimeter of the room, the top of the "soffit" starts 1' down from the ceiling and is about 3' in depth and at the bottom is about 2' wide. I know based on Figure 8.6.5.1.2(b) that I'm going to have heads in the bottom of the "soffit", my question is do I need to space the heads at the ceiling from the wall or from the edge of the soffit? I'm attaching a pdf of the soffit, not sure if the forum will let me post it so if it doesn't come through contact me directly and I will forward it. Thanks, _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
