Nope nothing's changed. Still metric, and primarily relative to millimeters.
Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Keddie Sent: Monday, October 29, 2007 2:52 PM To: [email protected] Subject: RE: UK scale No. Unless things have changed recently, UK adopted the metric system in 1971. Your 1/4" = 1'-0 scale is close to a 1 in 50mm scale. Also, the pipe dias are 25mm, 32mm, 40mm etc to correspond with 1", 1 1/4", 1 1/2" The measurement is in millimeters. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, October 29, 2007 1:38 PM To: [email protected] Subject: UK scale Hello Everyone, Are plans drawn in the UK using 1/4" = 1' ? I had this question asked of me and, by-golly, I found myself scratching my head. Regards ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
