Tom,
If your cut is straight on the pipe, the Rigid is the best in-place groover
that I have used.  The Pace groover is also an acceptable alternative since
it can also be used on the machine, but when you are grooving schedule 40 in
the air it has a tendency to walk.

Hope this helps!

 
B.J. Newlin
Bamford Fire Sprinkler Company

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross
Sent: Monday, April 07, 2008 6:48 AM
To: [email protected]
Subject: Fitter Question

Maybe more suited for chat but I'll throw it out here.

I need to get an in-place groover for an upcoming job.
I've borrowed a friends rigid before but it's gone.
Can any fitters share their likes and dislikes?  
Rigid vs. Reed, or others...

I wish they made one for a 700 as I have to groove old 4" and 6" sch. 40.
I've got to cut-in about 12 FCV's 8-10' in the air.
All recommendations and advice accepted.
(I don't like roustabouts)

Tom
GRS
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to