Thanks, that is what I thought. 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeff
Hewitt
Sent: Thursday, May 29, 2008 4:20 PM
To: [email protected]
Subject: Re: Max flow for class I standpipes

Fully sprinklered building, 1000-gpm max. for standpipes.



Jeff Hewitt, PE, SET, SFPE (Professional Member) Corporate Engineer
Bi-State Fire Protection Corporation
241 Hughes Lane
St. Charles, MO  63301
636-946-0011
636-946-5172 (FAX)

This e-mail and any attachments are CONFIDENTIAL and may be protected by
one or more legal privileges.  It is intended solely for the use of the
addressee identified above.  If you are not the intended recipient, any
use, disclosure, copying or distribution of this e-mail is unauthorized.
If you received this e-mail in error, please notify the sender
immediately at the above captioned address.
----- Original Message -----
From: "Dewayne Martinez" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, May 29, 2008 4:12 PM
Subject: Max flow for class I standpipes


What is the max flow for class I standpipes in a fully sprinklered
building?  I have 4 in a building and have been taught in the past to
only calculate 1000 gpm max (7.10.1.1.3, NFPA 14 (03 ed)) but section
7.10.1.2.3 seems to contradict this.
Thanks,
Dewayne
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field) 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to