Greg,
I did a play space about a year ago. The existing system was design
to OH2 and that seemed consistent with what was going to be put in.
There was plastic, but very little concentration or continuity. The
standard obstruction rules apply. Your "swiss cheese" decks should be
treated like any grated floor. If they start putting the injection
moulded stuff in there, that changes everything.
At 12:05 PM 6/23/2008, you wrote:
OK, I have experienced the inflatable "Bounce" structures and read the
previous post's concerning the same. However; what about the open type
playground structure made out of metal with Poly netting and foam insulation
around the posts to protect the kids noggins? All of the decks are steel
with holes to like swiss cheese so water could penetrate the structure all
the way down to the floor. I do not believe there is a roof over this
structure either.
I guess this is similar to what the old McDonalds playgrounds were like.
I am thinking a max of OH2 would be fine and the engineer doesn't know. Any
ideas?
Thank you,
Greg McGahan
Living Water Fire Protection, LLC
1160 McKenzie Road
Cantonment, FL 32533
850-937-1850
Fax: 850-937-1852
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
www.fpdc.com
860.535.2080
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
