Also, if you have a full standard version of Adobe, you can use the selection/snap tool and make a pdf for import. Not sure which drawing program you use, But I use Autosprink. One of the ones I did was the figure showing the heater detail with the areas for high temp and intermediate temp sprinklers. I could then scale it, hatch it lightly, and show where different temp heads would be used. This of course is if you have 13 in pdf format on your machine. Absent that, you could scan the page into pdf format if you have the hardware. This is not much different from copy then tape on the drawing back in the old hand drawn days.
R/ Matt Matthew J. Willis Living Water Fire Protection, LLC. 1160 McKenzie Rd. PO Box 877 Cantonment, FL. 32533 850-937-1850 Voice 850-937-1852 Facsimile [EMAIL PROTECTED] ----- >-----Original Message----- ----- >From: [EMAIL PROTECTED] ----- >[mailto:[EMAIL PROTECTED] On ----- >Behalf Of Todd Williams - FPDC ----- >Sent: Thursday, July 03, 2008 1:50 PM ----- >To: [email protected] ----- >Subject: Re: Drawing Details ----- > ----- >Anything specific you are looking for? ----- > ----- >At 02:10 PM 7/3/2008, you wrote: ----- >>Hello sprinklerforum, ----- >> ----- >> I am looking for a good source of details in .DWG ----- >format to use in design ----- >> drawings. I would like to find details like provided ----- >in many of the NFPA ----- >> books but they will not release them. Any and All ----- >leads and links will be ----- >> perused. Thanks ----- >> ----- >>-- ----- >>Best regards, ----- >> Charles Thurston ----- >mailto:[EMAIL PROTECTED] ----- >> Coastal Fire Protection ----- >> ----- >>_______________________________________________ ----- >>Sprinklerforum mailing list ----- >>[email protected] ----- >>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum ----- >> ----- >>To Unsubscribe, send an email ----- >>to:[EMAIL PROTECTED] ----- >>(Put the word unsubscribe in the subject field) ----- > ----- >Todd G. Williams, PE ----- >Fire Protection Design/Consulting ----- >Stonington, Connecticut ----- >www.fpdc.com ----- >860.535.2080 ----- >_______________________________________________ ----- >Sprinklerforum mailing list ----- >[email protected] ----- >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum ----- > ----- >To Unsubscribe, send an email ----- >to:[EMAIL PROTECTED] ----- >(Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
