Looking for license requirements for contractors in Aurora Colorado. Specifically "qualifying party" or sprinkler designer requirements related to PE or NICET or other.
Thanks, Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Leyton Sent: Tuesday, March 03, 2009 10:47 AM To: [email protected] Subject: Alabama PE requirements Good Morning Forumites: If anyone can enlighten me on the following, please email off-forum at your earliest opportunity. We've been asked to provide construction documents for a box retail store in Huntsville, AL and I'm wondering: 1) Does AL require a PE to sign/seal 3rd party designs for submittal/permit/construction? 2) If yes, what class of engineer may do so - ME, FPE, other? 3) If yes, I would appreciate a referral to a qualified PE with whom we could partner on this project. Thanks, Steve Leyton PROTECTION DESIGN & CONSULTING 8849-B Complex Drive San Diego, CA 92123 ------------------------------------------------------------- Ph: 858.751.2930 - ext. 102 Fax: 858.751.2933 Cell: 619.972.5696 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
