Adding to Roland, Some states such as New Jersey have programs such as Public Employees Occupational Safety & Health Program also referred to as PEOSH. NJ's references are available online at; http://www.state.nj.us/health/eoh/peoshweb/.
Most of the federal OSHA standards (29 CFR 1910) - General Industry Standards(29 CFR 1926) - Construction Standards and (29 CFR 1928) - Agricultural Standards have been adopted under the New Jersey PEOSH Act. Lock out Tag Out (LOT0) information can be found at; http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id =9804 Hope that helps John Drucker -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Roland Huggins Sent: Thursday, May 14, 2009 6:22 PM To: [email protected] Subject: Re: Lock out/Tag out Your client may also have their own guidance (especially if large company and/or government) that must be applied for work performed on their site. Lockheed Martin had requirements that exceeded OSHA. Same applies to confined space entry. Roland On May 14, 2009, at 3:08 PM, Forest Wilson wrote: > We participate in the OSHA consultation services and our OSHA rep > thought that it should be locked out. > But I don't think 98% of contractors do it. > OSHA has free consults I would call them for their opinion. > ------Original Message------ _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
