Thanks guys.

On Wed, Jun 17, 2009 at 4:51 PM, Cliff Whitfield <[email protected]>wrote:

> Nick,
>
> It has always been my belief that unless there was some reason to remove an
> existing system, I always leave it in place.   Naturally there are some
> instances that would require removal but many times they are fine left in
> place.    If you leave them, this owner may one day sell the bldg and the
> new owner could remove the ceiling and then you have saved/made him some
> $$.
>
> Cliff
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Nick Melosi
> Sent: Wednesday, June 17, 2009 4:38 PM
> To: [email protected]
> Subject: Metal building
>
> Hello Everyone.
>
> There is a metal building(23-0 Floor to deck), open floor plan.   Standard
> uprights in there now.   A drop ceiling is going to be put in at 10'-0.
>  The
> area in between the drop ceiling and deck is non-combustible.   This area
> does not need to be sprinkled.   Correct?
> Thank you.
>
> --
> Nick Melosi
> dm design
> www.mydmdesign.com
> _______________________________________________
> Sprinklerforum mailing list
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email 
> to:[email protected]<to%[email protected]>
> (Put the word unsubscribe in the subject field)
>
> _______________________________________________
> Sprinklerforum mailing list
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email 
> to:[email protected]<to%[email protected]>
> (Put the word unsubscribe in the subject field)
>



-- 
Nick Melosi
dm design
www.mydmdesign.com

Tampa Office:
P.O. Box 4477
Tampa, FL 33677
813.944.2008

Highland Office:
P.O. Box 504
Highland, IL 62249
618.203.3663
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to