Even the Seton snap on style need to be compatible since they are in contact with the CPVC, just like the wire insulation spray foams fire stopping and the list goes on.
Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, July 24, 2009 8:47 AM To: [email protected] Subject: RE: marking CPVC piping Probably your best route of action. EOR probably doesn't know there's any issue anyway. If there's any issues with adhesive based pipe markers what about using the snap on style that requires no adhesive? http://www.seton.com/seton/spacecode/GD3/100002.200132.html?newSearchTerms= Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Greg McGahan Sent: Friday, July 24, 2009 10:41 AM To: [email protected] Subject: RE: marking CPVC piping You ever met a lawyer? Sure, but we all get invited to the party and pay the cover charge. I will go to Blazemaster and ask, I can't afford to take a chance. Greg McGahan Operations Manager Living Water Fire Protection 1160 McKenzie Road P.O. Box 877 Cantonment, Florida 32533 (850) 937.1850 | Fax (850) 937.1852 | Cell (850) 554.3231 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ron Greenman Sent: Friday, July 24, 2009 9:40 AM To: [email protected] Subject: Re: marking CPVC piping And if you suggest sticker XYZ and he approves it then isn't he responsible to insure compatibility? On Fri, Jul 24, 2009 at 7:29 AM, <[email protected]> wrote: > That may be true Greg, but if I'm not mistaken, it's also HIS job to specify what you are to provide? > > > Craig L. Prahl, CET > Fire Protection Specialist > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - > 864.599.8439 [email protected] http://www.ch2m.com > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Greg > McGahan > Sent: Friday, July 24, 2009 10:27 AM > To: [email protected] > Subject: RE: marking CPVC piping > > Easier said than done Roland...."It is in your contract to provide, my job to approve" > > Greg McGahan > Operations Manager > > Living Water Fire Protection > 1160 McKenzie Road > P.O. Box 877 > Cantonment, Florida 32533 > (850) 937.1850 | Fax (850) 937.1852 | Cell (850) 554.3231 > [email protected] > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Roland > Huggins > Sent: Friday, July 24, 2009 9:25 AM > To: [email protected] > Subject: Re: marking CPVC piping > > Just as I thought (you being in FL). If the PE wants something that isn't the norm, let him/her direct which one to use. I wonder if they know there is a thing called Chemical Compatibility? > > Roland > > On Jul 24, 2009, at 7:19 AM, Greg McGahan wrote: > >> The PE directed us to put them on.. I will call today, it was late >> yesterday and I was sure someone had fought this battle before - but >> I guess not. >> >> Greg McGahan >> Operations Manager >> >> Living Water Fire Protection >> 1160 McKenzie Road >> P.O. Box 877 >> Cantonment, Florida 32533 >> (850) 937.1850 | Fax (850) 937.1852 | Cell (850) 554.3231 >> [email protected] >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected] >> ] On Behalf Of Roland Huggins >> Sent: Friday, July 24, 2009 9:18 AM >> To: [email protected] >> Subject: Re: marking CPVC piping >> >> Why haven't you already called BlazeMaster? Also, what are the >> stickers for and most importantly, who directed you to put them on? >> >> Roland >> >> On Jul 23, 2009, at 1:58 PM, Paul Johnson wrote: >> >>> You're probably not going to like this answer, but here goes anyway: >>> >>> Any questions regarding CPVC materials (or any manufactured product >>> for that >>> matter) will be best answered by your manufacturer. >>> >>> I believe it can be considered a Best Practice to seek product >>> information from an acknowledged expert. Since manufacturers must >>> (or at least >>> should) >>> know everything there is to know about their products, it would be >>> appropriate to direct all questions regarding those products to them. >>> >>> >>> Thanks, >>> >>> PJ >>> >>> Paul Johnson >>> Bardane, Inc. Visioning a competitive workforce >>> (407) 401-7154 - Office >>> (407) 399-5081 - Mobile >>> [email protected] >>> www.bardane.net >> >> _______________________________________________ >> Sprinklerforum mailing list >> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >> For Technical Assistance, send an email to: >> [email protected] >> >> To Unsubscribe, send an email >> to:[email protected] >> (Put the word unsubscribe in the subject field) >> >> _______________________________________________ >> Sprinklerforum mailing list >> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >> For Technical Assistance, send an email to: >> [email protected] >> >> To Unsubscribe, send an email >> to:[email protected] >> (Put the word unsubscribe in the subject field) >> > > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: > [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: > [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: > [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > -- Ron Greenman Instructor Fire Protection Engineering Bates Technical College Tacoma, WA Member: SFPE, ASCET, NFPA, AFSA, NFSA AFAA _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
