I've seen it used a few times (CPVC), but follow Cliff's advice and check with the local authority
At 08:50 PM 8/16/2009, you wrote: >J, > >I think the big issue with non-metallic piping would be if it will meet code >from a building code standpoint. There are some cases where plastic is not >acceptable in an exposed condition. Check with your local plumbing and/or >building inspector. > >Cliff Whitfield, SET >Fire Design, Inc. > >[email protected] >www.fire-design.com > > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Jay Jay >Blocker >Sent: Sunday, August 16, 2009 7:46 PM >To: [email protected] >Subject: Main Drain > >I found where parts that dont affect the operation of a system dont have to >be listed. Is there anywhere that says main drain piping has to be metal? > >J > > > >_______________________________________________ >Sprinklerforum mailing list >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) > >_______________________________________________ >Sprinklerforum mailing list >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
