If wood construction than it must have one at top and bottom, unless the elevator code mandates otherwise. For a while in Ohio, the Relevator ahjs would not allow any fire sprinklers.
Forest Wilson Project Manager Cherokee Fire Protection Co. 3195 Dayton Xenia Rd Ste 900 Dayton OH 45434 ph: 937-376-2333 fx: 614-455-4324 cell: 937-307-5647 . Visit our blog: www.cherokee-fire.blogspot.com NOTICE: The information contained in this email is intended to be solely for the use of the named individual or entity to which it is directed and may contain information that is privileged or otherwise confidential. It is not intended for transmission to, or receipt by, anyone other than the named addressee (or a person authorized to deliver it to the named addressee). It should not be copied or forwarded to any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email or by calling Cherokee Fire Protection Co. at 888-347-3079 toll free. -----Original Message----- From: Todd Williams <[email protected]> To: [email protected]; [email protected] Sent: Fri, 11 Sep 2009 19:51:58 -0400 Subject: Re: 13D Elevator The elevator supplier can probably give clearances between the bottom of the car and the pit. As far as eliminating heads, etc, the local elevator code may be the best source of answers At 06:58 PM 9/11/2009, you wrote: >Next question; 13D allows for the elimination of the sprinkler in the >elevator equipment room, though I'm including one on this project since the >room is designated as equipment/storage. I'm assuming that I will need a >sprinkler at the top and bottom of the elevator shaft since it is >constructed of wood. The trouble that I foresee here is that there is only >18" between the finished floor and the bottom of the elevator pit. Will >this give me enough room to install a sprinkler? If there is a smoke at the >top of the shaft can I eliminate that sprinkler? Or, should I eliminate the >pit sprinkler and keep the upper sprinkler? Or, is there another solution >that someone else has used? > >Thanks again, > >Bob Knight, CET >1660 Hill Rd >Melba, Idaho 83641 >(208) 318-3057 >(208) 495-2057 fax >[email protected] >www.firebyknight.com > >-------------- next part -------------- > >No virus found in this outgoing message. >Checked by AVG - www.avg.com >Version: 8.5.409 / Virus Database: 270.13.91/2363 - Release Date: >09/11/09 09:15:00 >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
