A link for the Grinnell F920C:
http://www.georgiafiresprinkler.org/downloads/pdf/Grinnell-F920C-Pendent
-On-Off.pdf

If I'm looking at the data sheet correctly it appears the sprinkler
didn't use a link.  Piston, spring, o-rings, strainer, pilot valve...a
real piece of work.  It automatically resets after the temperature
drops.

Bobby McCullough


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
ParsleyConsulting
Sent: Friday, October 02, 2009 11:42 AM
To: [email protected]
Subject: Re: Not again.... or AKA RE: Now we know...it was so oldit
disintegrated....

Chris,

Nice picture, and a good write-up from the fire marshal.

I wonder what happened to the link, though.  The write-up suggests the 
o-ring on the thermal control device for the plunger failed, but there 
was no comment on the link itself.

It'll be interesting to see what further information they get.
-- 
PARSLEY CONSULTING
Ken Wagoner, SET
760.745.6181 voice
760.745.0537 fax
[email protected] <mailto:[email protected]> e-mail
www.ParsleyConsulting.com <http://www.ParsleyConsulting.com> website

Chris Gaut wrote:
> OK, I think I was able to find a source to share the pic and press 
> release.
> Check out cgaut.keepandshare.com
>
> Hope this works. Thanks
>
> Chris

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to