One of the other designer's had the same issue last week and he called up Bentley, who creates microstation, and just asked for a trial version. Now we can open microsation drawings and save as .dwg files.
Unfortunately, the trial is only for 30 days Mike Brown -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob Knight Sent: Wednesday, April 21, 2010 11:33 AM To: [email protected] Subject: RE: Microstation file conversion Ed, Here's a couple of links to try. http://www.dwgconverter.net/dgn-to-dwg-converter.html http://www.autodwg.com/dgn-to-dwg/ Bob Knight -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ed Kramer Sent: Wednesday, April 21, 2010 9:15 AM To: [email protected] Subject: Microstation file conversion Anybody have a recommendation for inexpensive software that will convert Microstation files (.dgn) to AutoCAD files (.dwg)? This is the 1st project in 24 years I've needed to do this, so I'm not looking to spend much. Ed Kramer Littleton, CO No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 9.0.814 / Virus Database: 271.1.1/2823 - Release Date: 04/20/10 06:45:00 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
