Tom,
Are you referring to the Air Compressor for the dry pipe system?
We have always used a short piece of rubber hose just to isolate vibration
between the air compressor and the sprinkler system.
A jockey pump is usually associated with a fire pump installation.
Regards,
G. Tim Stone
G. Tim Stone Consulting, LLC
NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services
117 Old Stage Rd. - Essex Jct., VT. 05452
TEL: (802) 434-2968 Fax: (802) 434-4343
[email protected]
> -----Original Message-----
> From: [email protected] [mailto:sprinklerforum-
> [email protected]] On Behalf Of Thomas Reinhardt
> Sent: Monday, November 01, 2010 12:54 PM
> To: [email protected]
> Subject: Sensing lines on jockey pump
>
> I know this subject has been addressed. Can the sensing lines on a
> jockey pump for a dry system be flexible hose or hard pipe? Thanks
>
> Wheeling Fire Inspector
> Tom Reinhardt
> 2 Community Boulevard
> Wheeling, IL 60090
> 847-499-9067
>
>
> ________________________________
> IMPORTANT NOTICE: This e-mail message is intended to be received only
> by persons entitled to receive the confidential information it may
> contain. E-mail messages may contain information that is confidential
> and legally privileged. Please do not read, copy, forward, or store
> this message unless you are an intended recipient of it. If you have
> received this message in error, please forward it to the sender and
> delete it completely from your computer system.
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:Sprinklerforum-
> [email protected]
> (Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
