Forum: I've been running in to this scenario quite a bit lately and would like some expert advice. We do some upfit work for a retail chain that has started adding suspended banners to all of their stores. These banners are a 9' wide x 32' long open top rectangle that hangs 9" down from the ceiling. I do not know how deep they are or what they are made out of. The stores currently have ECOH heads spaced at 18x18, the existing heads land on the outer perimeter of the banner and will throw to the center from each side. Since they are less than 18" down from the deflector it seems as though I would need to add heads to the "inside" of the rectangle but if I do that then I'll be spaced too close to the existing heads on the "outside" as these heads have a minimum spacing of 12'. Any ideas?
Brian Harris First Defense Fire Protection 11957 Ramah Church Road Huntersville, NC 28078 Phone: 704.948.3506 Fax: 704.948.3507 Nicet # 128476 ======= Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 7.0.0.21, Virus/Spyware Database: 6.16580) http://www.pctools.com/ ======= _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
