That's my option #2. A 6x5x9" L. reducer but all 6" pipe. Weldbend has them.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hairfield Sent: Monday, August 20, 2012 1:51 PM To: AFSA SprinklerFORUM Subject: RE: Flange Question Simple solution, Use a 5" extra heavy blind flange and 6" standard blind flange, have fab shop drill it out and weld the 5" and 6" flanges on it......instant spool piece. Mike > From: [email protected] > To: [email protected] > Subject: RE: Flange Question > Date: Mon, 20 Aug 2012 13:37:03 -0400 > > Tom, > I think you will find a 6" Extra Heavy flange has 12 holes for 7/8" > bolts and is 12.5" in diameter. > Dick > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tom > Duross > Sent: Monday, August 20, 2012 12:30 PM > To: [email protected] > Subject: Flange Question > > I have a field condition.. > Does anyone know if a 6x11 125# flange (9 1/2") will bolt onto a 5x11 > 250# flange (9 1/4")? > Just use 3/4" bolts? > Thanks, > TD > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20120820/5b2476b0/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
