Nope. It's stainless throughout the wall thickness. It's also more malleable than carbon steel so it roll grooves just fine. Mark at Aero
----- Original Message ----- From: Brad Casterline [mailto:[email protected]] Sent: Friday, October 26, 2012 05:00 PM To: [email protected] <[email protected]> Subject: RE: Stainless Steel Pipe Thanks Mark. Assuming stainless is like galvanized, it should be Cut Grooved only? -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Friday, October 26, 2012 11:00 AM To: [email protected] Subject: Re: Stainless Steel Pipe Yes Mark at Aero ----- Original Message ----- From: Brad Casterline [mailto:[email protected]] Sent: Friday, October 26, 2012 03:51 PM To: [email protected] <[email protected]> Subject: Stainless Steel Pipe Can S.S. pipe be grooved? 2", 2.5", 3", for foam concentrate. thanks, Brad Casterline, NICET IV Fire Protection Division FSC, Inc. P: 913-722-3473 [email protected] www.fsc-inc.com Engineering Solutions for the Built Environment -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20121026/ed1e9faf/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
