It's not as bad as it sounds. But be cautious about self-loading supplies like powders and primers. Sometimes they go together with finished ammo. Only takes a shelf of that stuff to wreck a fire protection design.
Chris Cahill, PE* Senior Fire Protection Engineer, Aviation & Facilities Group Burns & McDonnell 8201 Norman Center Drive Bloomington, MN 55437 Phone: 952.656.3652 Fax: 952.229.2923 [email protected] www.burnsmcd.com Proud to be one of FORTUNE's 100 Best Companies to Work For *Registered in: MN -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Johnson, Duane (NIH/OD/ORS) [C] Sent: Wednesday, July 10, 2013 6:28 AM To: '[email protected]' Subject: RE: ammo storage Table A.5.6.3 Duane Johnson, PE Program Manager Division of the Fire Marshal (Contractor) Office of Research Services National Institutes of Health 301-496-0487 "Protecting Science - One Sprinkler at a Time" -----Original Message----- From: Todd - Work [mailto:[email protected]] Sent: Wednesday, July 10, 2013 7:09 AM To: [email protected] Subject: ammo storage I have been asked about a facility that plans to store small arms (pistol/rifle/shotgun) ammunition on pallets 5 ft high. This is for civilian use. I haven't been able to find any resources that address this. Any suggestions? Todd G Williams, PE Fire Protection Design/Consulting Stonington, CT www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
