Are you sure they are Omegas? I believe RASCO made a very similar head. On Jul 12, 2013 6:03 PM, "ampeck" <[email protected]> wrote:
> I forgot to send this awhile back but I had a very interesting find a few > weeks back. > > But Omega was first recalled middle to end of the 90's correct? Well this > building here in Cambodia is a 22 floor building and was built in 2005. > > As the first thing I always do when I enter a building is look up and went > "huh those are interesting heads, I should get a better look." The ceiling > at the entrance is about 20 foot so I couldn't quite make them out. I > forgot and walked on. Went into an office with a lower ceiling and was > chatting with a guy until I just happened to look up again. My jaw just > dropped to the floor. Omega heads. > > After that I ran around the building checking everywhere I could and yep > all Omega. > > Either these were from a large batch of unused heads someone bought cheap > after the recall that were sitting in a Asian warehouse collecting dust or > god forbid removed heads from the States and sold over here. Get paid to > remove them and install new and then sell the old overseas, great marketing > idea. > > I don't know if maybe one of their manufacturing plants or warehouses were > over here in south east asia but seems suspicious to me. > _______________________________________________ > Sprinklerforum mailing list > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
